How to Choose the Right Products for Particle Capture and Cleanliness Inspection

In technical cleanliness work, the accuracy of the final analysis does not start at the microscope. It starts with how the sample is captured, protected, stored, and prepared.

For engineers, maintenance managers, and procurement teams, the practical question is usually not “Which consumable is cheapest?” It is:

Which consumable gives us a reliable, repeatable way to capture and handle contamination without adding uncertainty to the result?

JOMESA consumables are used in particle capture, dustfall collection, filter membrane handling, and cleanliness analysis workflows. PERIPLUS MRO supplies a focused range of JOMESA products for teams that need practical support for environmental monitoring, Illig value checks, filter storage, and particle trap handling.

Why Consumable Choice Matters in Cleanliness Inspection

Particle analysis is often used to answer questions such as:

• Are particles present in a production or inspection environment?
• What size are they?
• Are they metallic, non-metallic, or fibers?
• Are they coming from the process, the component, the environment, or the handling method?

JOMESA describes microscopic analysis of filter membranes, particle traps, and particle stamps as a method for determining particle size and type, including metallic, non-metallic, and fiber classification.

That means the consumable is not just packaging. It is part of the measurement chain.

If the wrong capture or storage item is used, the result can be affected by poor handling, particle loss, added contamination, or inconsistent sample positioning.

Particle Traps: For Environmental Pollution and Dustfall Monitoring

JOMESA particle traps are designed to capture particles falling onto a sticky surface. According to JOMESA, the sticky surface traps particles from the surrounding environment once the protective cover is removed. After the defined exposure time, the trap is covered again and can be inserted into a holder for analysis on a JOMESA system.

Recommended product: PT60X60 Particle Trap Slide

Order code: PT60X60
Pack size: 16 pcs / box
Typical use: Illig value checks, environmental inspection, and dustfall collection.

This is the main product to consider when the goal is to monitor airborne or settling contamination in a controlled area, production line, inspection bench, or cleanliness-sensitive process.

Use PT60X60 when you need to:

• Capture dustfall or environmental particles
• Support Illig value or environmental cleanliness checks
• Collect particles in a controlled and repeatable format
• Prepare samples for later microscopic cleanliness analysis

Dustfall Adhesive Sheets: Refill Options for Particle Trap Workflows

For teams using particle trap slides regularly, refill adhesive sheets help maintain the workflow without changing the underlying inspection approach.

Recommended products: PT49-300, PT54B-300, PT54-300

Order codes: PT49-300, PT54B-300, PT54-300
Pack size: 300 pcs / box
Typical use: Refill sheets for particle trap slides.

These three products are best viewed as related consumables for the same general workflow: particle capture and dustfall monitoring.

They are relevant when:

• Particle traps are used frequently
• Operators need replacement adhesive sheets
• A process requires multiple trap formats
• Standardized replenishment is needed for inspection teams

For procurement teams, grouping these products together can make sense because they support the same particle capture application. For engineers, the important point is to match the adhesive sheet variant to the specific trap format and inspection procedure already in use.

Filter Holder Slides: For Membrane Storage and Archiving

Not every cleanliness inspection starts with a particle trap. Many workflows involve filter membranes, especially when particles are extracted from components, fluids, or process samples and then analyzed under a microscope.

JOMESA states that its FR60x60 filter mounts are used for cleanliness analysis and permanent storage of filters. The public JOMESA description also notes that filter mounts consist of a plastic backside and a glass cover on the front side.

Recommended product: FR60X60 Filter Holder Slide

Order code: FR60X60
Pack size: 20 pcs / box
Typical use: Filter membrane storage.

Use FR60X60 when the priority is safe handling and storage of filter membranes after sample preparation.

This product is especially relevant when:

• Filter membranes need to be archived
• Samples may need to be rechecked later
• Handling damage must be minimized
• Membranes need a consistent storage format for analysis documentation

For technical buyers, this is less about convenience and more about traceability. A properly stored filter membrane is easier to identify, protect, and re-analyze if questions arise later.

Filter Membrane Backing Paper: Small Item, Important Handling Role

Filter membranes can vary in thickness and handling behavior. JOMESA notes that filter membranes must be underlaid by paper to help prevent slipping, and that this paper underlay also supports centering of the filter.

Recommended product: DRPJ49-300 Filter Membrane Backing Paper

Order code: DRPJ49-300
Pack size: 300 pcs / box
Typical use: Used together with filter holder slides.

DRPJ49-300 should be considered together with FR60X60 rather than as a standalone item. It supports the membrane handling and storage process.

Use it when:

• Filter membranes are being stored in holder slides
• Centering and stable positioning are important
• Operators need repeatable preparation steps
• Membrane slipping could affect inspection quality or workflow consistency

Particle Stamp: Accessory for Dustfall Adhesive Sheet Handling

The particle stamp is used together with dustfall adhesive sheets. In practice, this type of accessory supports a more controlled handling process when working with adhesive collection media.

Recommended product: PartStamp Particle Stamp

Order code: PartStamp
Pack size: 1 pc
Typical use: Used with dustfall adhesive sheets.

Use PartStamp when your process involves dustfall adhesive sheets and you want a more consistent way to apply or handle the adhesive collection surface.

This is especially relevant when:

• Operators perform repeated particle capture steps
• Handling consistency matters
• Adhesive sheets are part of a defined inspection procedure
• The site wants to reduce variation between users

Quick Selection Guide

Practical Buying Considerations for Engineers and Procurement Teams

When selecting JOMESA consumables, start from the inspection workflow rather than the product list.

1. Are you capturing particles from the environment?

Choose PT60X60 and the relevant dustfall adhesive sheet refill format.

This is the right path when monitoring dustfall, environmental pollution, or airborne particle settling in a cleanliness-sensitive area.

2. Are you storing or archiving filter membranes?

Choose FR60X60 and DRPJ49-300 together.

This combination supports membrane storage, backing, and handling.

3. Are adhesive sheets used repeatedly by operators?

Add PartStamp if your process benefits from more consistent adhesive sheet handling.

4. Do you need repeatability across sites or shifts?

Standardizing consumables helps reduce differences between operators, shifts, and locations. This is particularly important where cleanliness results are used for supplier quality, customer audits, or internal process control.

Key Takeaways

• Particle analysis accuracy depends on the full sample handling workflow, not only the microscope.
• PT60X60 is used for particle capture, environmental inspection, Illig value work, and dustfall collection.
• PT49-300, PT54B-300, and PT54-300 support the dustfall adhesive sheet refill workflow.
• FR60X60 and DRPJ49-300 should be considered together for filter membrane storage and support.
• PartStamp is an accessory for use with dustfall adhesive sheets.
• PERIPLUS MRO supplies these JOMESA consumables for technical cleanliness and particle collection workflows.

Need Support Selecting the Right JOMESA Consumables?

PERIPLUS MRO can help identify the right JOMESA consumables for your particle capture, filter membrane storage, and cleanliness inspection workflow.

For quotation or availability, contact sales@periplusmro.com or call +36 707198323.