UNI-T Digital Oscilloscope, 100 MHz, 4-Channel, 2 GSa/s – UPO1104
Regular price
212.342 Ft
VAT included
Couldn't load pickup availability
Got questions, ask an expert!
The UNI-T UPO1104 is a four-channel digital phosphor oscilloscope with 100MHz bandwidth, up to 2GSa/s sampling and 56Mpts memory depth. Its fast waveform capture, serial bus decoding and remote-control functions support embedded systems, electronics development, maintenance and education.
Key Features
- Four-Channel Analysis – 100 MHz bandwidth across four analogue inputs
- Fast Signal Capture – Up to 2 GSa/s and 500,000 wfms/s
- Deep Memory – Maximum 56 Mpts waveform record length
- Protocol Decoding – Supports RS-232/UART, I²C and SPI
- Remote Operation – Browser-based control through the built-in Web server
Product Specifications
| Oscilloscope Type | Digital phosphor oscilloscope |
|---|---|
| Display Technology | UNI-T Ultra Phosphor 2.0 |
| Display | 7-inch TFT LCD, 800 × 480 pixels |
| Display Colour | 24-bit true colour with 256-level intensity grading |
| Automatic Measurements | 36 waveform parameters with statistical analysis |
| Waveform Recording | Up to 120,000 frames with playback |
| Frequency Counter | 7-digit hardware frequency counter |
| Digital Voltmeter | Independent DVM module with over-limit alarm |
| FFT | Up to 1 Mpts with spectrum and waterfall display modes |
| Serial Bus Decoding | RS-232/UART, I²C and SPI |
| Interfaces | USB Host, USB Device, LAN, external trigger and AUX output |
| Remote Control | Built-in Web server and SCPI over LAN |
| Optional Bandwidth Upgrade | Upgrade to 200 MHz available separately; not included |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Maximum Power Consumption | 75 VA |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 306 × 138 × 107 mm |
| Net Weight | Approximately 2.45 kg |
Measurement Specifications
| Analogue Bandwidth | DC to 100 MHz |
|---|---|
| Analogue Channels | 4 |
| Maximum Sample Rate | 2 GSa/s with one channel; 1 GSa/s with two channels; 500 MSa/s with four channels |
| Maximum Memory Depth | 56 Mpts |
| Waveform Capture Rate | Up to 150,000 wfms/s normally; 500,000 wfms/s in Fast Acquire mode |
| Rise Time | ≤3.5 ns |
| Vertical Resolution | 8-bit |
| Vertical Scale | 500 μV/div to 20 V/div |
| Time Base Range | 1 ns/div to 1000 s/div |
| Input Coupling | AC, DC and GND |
| Input Impedance | 1 MΩ ±2% in parallel with 16 pF ±2 pF |
| Maximum Input Voltage | 400 V maximum (DC + AC peak) |
| Bandwidth Limit | 20 MHz |
| Trigger Modes | Auto, normal and single |
| Trigger Types | Edge, pulse, slope, video, runt, window, delay, timeout, duration, setup/hold, Nth edge and pattern |
Applications
- Embedded system design and serial bus debugging
- Electronic circuit development and verification
- Consumer and automotive electronics testing
- Industrial equipment maintenance and troubleshooting
- Laboratory and electronics education
Included Components
- UPO1104 digital oscilloscope
- UT-P04 100 MHz passive oscilloscope probe × 4
- USB data cable × 1
- Destination-standard power cord × 1
24-Month Product Warranty
Consumer purchases of this product include a 24-month PERIPLUS commercial product warranty from the date of delivery. This warranty is additional to, and does not limit, any mandatory statutory consumer rights.